Buying Guide

How to Choose Sim Racing Equipment

Direct drive vs belt drive, load cell pedals, cockpit rigs and what to buy first — a practical guide for UK sim racers.

Building a sim racing setup is a significant investment. This guide helps you understand the key components, the differences between entry-level and performance hardware, and how to prioritise your spending for the best on-track improvement.

Direct Drive vs Belt Drive Wheelbases

The wheelbase is the most important component in a sim racing setup. Belt drive wheelbases (such as the Fanatec CSL DD and Thrustmaster T300) use a motor connected to the steering shaft via a belt, which introduces a small amount of deadzone and reduces force feedback detail. Direct drive wheelbases connect the motor directly to the shaft, providing sharper, more detailed force feedback with no deadzone. For serious sim racers, direct drive is the clear choice. Entry-level direct drive wheelbases (8–12Nm) are now available at competitive prices and represent a significant step up from belt drive.

Load Cell Pedals: Why They Make a Difference

Standard potentiometer pedals measure brake input by position — how far you press the pedal. Load cell pedals measure force — how hard you press. This matches real-world braking far more closely, as racing drivers modulate brake pressure rather than pedal travel. The improvement in braking consistency with load cell pedals is significant and measurable in lap times. Heusinkveld Sprint and Ultimate pedals are widely regarded as the benchmark for sim racing pedals. If you can only upgrade one component after your wheelbase, make it the pedals.

Cockpit Rigs: Aluminium Profile vs Pre-Built

A rigid cockpit rig eliminates flex in your setup, which directly improves force feedback feel and pedal consistency. Aluminium profile rigs (such as those from Next Level Racing and Sim-Lab) are modular and adjustable, allowing you to dial in your seating position precisely. Pre-built rigs are quicker to assemble but less adjustable. For a permanent setup, an aluminium profile rig is the better long-term investment. Ensure your rig is compatible with your wheelbase mounting plate — most use a standard 70mm bolt pattern.

Racing Seats for Sim Rigs

A proper racing bucket seat improves immersion and reduces fatigue during long sessions. Fibreglass seats are lighter and more rigid than foam-padded gaming chairs, providing better feedback through the chassis. Ensure the seat is mounted at the correct height and angle for your body — your arms should be slightly bent at the elbow when holding the wheel, and your knees should be slightly bent when the pedals are fully depressed. Most sim rig seats use a standard side-mount bracket system.

What to Buy First: A Practical Upgrade Path

If you are starting from scratch, the recommended upgrade path is: (1) direct drive wheelbase, (2) load cell pedals, (3) rigid cockpit rig, (4) racing seat. The wheelbase and pedals have the greatest impact on lap times and driving feel. A rigid rig amplifies the benefit of a quality wheelbase. A racing seat improves comfort and immersion. Avoid spending heavily on a steering wheel before upgrading the wheelbase — the wheel's force feedback is limited by the wheelbase, not the other way around.

Shop Sim Racing Equipment at MPH

Browse direct drive wheelbases, load cell pedals, cockpit rigs and racing seats from Fanatec, Heusinkveld and Next Level Racing.

Shop Sim Racing