Buying Guide

How to Choose a Kart Helmet

Everything you need to know about CIK-FIA homologation, sizing, shell materials and visor types before you buy.

Choosing the right kart helmet is one of the most important decisions a karter can make. This guide covers the key standards, sizing methods and features to look for — so you can buy with confidence.

CIK-FIA Homologation: What the Standards Mean

All competitive karting helmets must meet CIK-FIA homologation. The current standard is CIK-FIA 8859-2015, which replaced the older 8859-2010 standard. Most national and international championships require 8859-2015 as a minimum. Some circuits also accept Snell CMR2016 or CMR2020 for junior classes. Always check your championship's technical regulations before purchasing — a helmet that is legal in club karting may not be accepted at national level.

How to Measure Your Head for a Kart Helmet

Measure the circumference of your head approximately 2.5cm above your eyebrows using a soft tape measure. Take the measurement three times and use the largest reading. Helmet sizes are given in centimetres: XS (53–54cm), S (55–56cm), M (57–58cm), L (59–60cm), XL (61–62cm). If you fall between sizes, size up — a helmet that is too tight will cause headaches and reduce concentration. Always try a helmet on before buying if possible, as head shapes vary between brands.

Shell Materials: Fibreglass vs Carbon Fibre

Entry-level and mid-range kart helmets use a fibreglass composite shell, which offers a good balance of strength, weight and cost. Premium helmets use a carbon fibre or carbon-Kevlar shell, which is significantly lighter (often under 1,200g vs 1,400g for fibreglass) and provides superior energy absorption. For club karting, fibreglass is perfectly adequate. For endurance racing or drivers who compete frequently, the weight saving of carbon fibre reduces neck fatigue over long stints.

Visor Types and Anti-Fog Treatments

Most kart helmets come with a clear polycarbonate visor as standard. Tinted visors are available for outdoor circuits in bright conditions but are not permitted in all championships — check your regulations. Anti-fog inserts (Pinlock or similar) are strongly recommended for UK conditions, where temperature changes between paddock and track can cause rapid fogging. Some helmets include an anti-fog insert in the box; others require it as an optional extra.

Ventilation and Interior Comfort

Good ventilation is essential for concentration and safety. Look for helmets with multiple intake vents at the chin and forehead, and exhaust vents at the rear. Removable and washable interior padding is a practical feature for regular racers — it extends the life of the helmet and maintains hygiene. Some premium helmets offer interchangeable cheek pads to fine-tune the fit.

When to Replace Your Kart Helmet

Replace your helmet immediately after any significant impact, even if there is no visible damage — the foam liner compresses on impact and cannot recover. As a general rule, helmets should be replaced every five years regardless of use, as the materials degrade over time. Check the manufacture date on the label inside the helmet. Most championships will not accept helmets older than five years from the date of manufacture.

Shop Kart Helmets at MPH

Browse our range of CIK-FIA approved kart helmets from Sparco, Alpinestars and OMP.

Shop Kart Helmets