Buying Guide
How to Choose a Race Suit
FIA homologation explained, sizing guidance and the difference between single-layer and multi-layer suits for circuit racing, hillclimb and track days.
A race suit is your primary fire protection in the event of an accident. Understanding FIA homologation levels, fabric construction and sizing will help you choose the right suit for your discipline and budget.
FIA Homologation: 8856-2000 vs 8856-2018
FIA race suits must carry either FIA 8856-2000 or the newer FIA 8856-2018 homologation. The 2018 standard introduced improved thermal protection requirements and a new labelling system. Most national championships now require 8856-2018 as a minimum for new suits purchased after 2020. The older 8856-2000 standard remains valid for club-level competition in many series, but check your championship's current regulations. Never purchase a suit without a valid FIA homologation label — unbranded or replica suits offer no verified fire protection.
Single-Layer vs Multi-Layer Suits
Single-layer suits (FIA 8856-2018 rated) are lighter and more comfortable for short-duration events such as sprint races and track days. Multi-layer suits (two or three layers of Nomex or similar aramid fabric) provide significantly greater thermal protection and are required for endurance racing and many national championships. The TPP (Thermal Protective Performance) rating on the FIA label indicates the level of protection: higher TPP means more time before a burn injury in a fire. For circuit racing, a two-layer suit is the practical minimum.
How to Size a Race Suit
Race suit sizing differs from standard clothing. Measure your chest (around the fullest part), waist (at the navel), hips (around the fullest part), inside leg and height. Most manufacturers provide a size chart — use your largest measurement as the guide. Race suits should fit snugly without restricting movement: you should be able to reach the steering wheel comfortably with the harness fastened. If you are between sizes, size up — a suit that is too tight restricts movement and reduces comfort over long stints.
Fireproof Underwear: Why It Matters
Fireproof underwear (balaclava, long-sleeve top and long-leg bottoms) significantly increases the total fire protection of your suit. Worn under a single-layer suit, a set of FIA-rated underwear can provide protection equivalent to a two-layer suit. Most championships require a balaclava as a minimum; many also require full underwear. Nomex and Lenzing FR are the most common materials. Wash fireproof underwear according to the manufacturer's instructions — incorrect washing can degrade the fire-resistant properties.
Caring for Your Race Suit
Race suits should be washed at low temperatures (typically 30°C) using a mild detergent — never use bleach or fabric softener, as these degrade the fire-resistant fibres. Hang to dry; do not tumble dry. Inspect the suit before each event for damage to seams, zips and the homologation label. A damaged or illegible homologation label may result in the suit being rejected at scrutineering. Store the suit flat or hanging — do not fold it tightly for long periods.
Shop Race Suits at MPH
Browse FIA-approved race suits from Sparco, Alpinestars, OMP and Bell.
Shop RacewearRelated Guides